What are the wear phenomena of hydraulic metal baler?

Mechanical equipment wear in the work is inevitable, because of the existence of friction, in order to make the equipment work, but at the same time, because of the existence of friction also causes wear between mechanical equipment, in the hydraulic metal baler, equipment wear is generally divided into two situations, one is the wear caused by the normal operation of the equipment, the other is the wear caused by adhesion. Xiaobian makes the following description for the above two kinds of wear.
1, normal wear
The wear in normal use is called the normal wear of the hydraulic metal baler, which generally appears in the new equipment, because the new friction surface has a certain roughness, the real contact surface is small, the wear is relatively fast, as the surface gradually wears down, the real contact area increases, the hydraulic metal baler gradually enters the normal stable wear stage, the friction surface wear is slight. And slow and steady.
2. Adhesive wear
Refers to the real contact point, due to solid phase welding, the contact surface of the material transferred from one appearance to another appearance signs, this situation is called adhesive wear, hydraulic metal baler in the occurrence of solid phase welding, the real contact point of the temperature may exceed the melting point, may not exceed the melting point.